Stay Warm With Attic Insulation

A well-insulated attic is like a cozy sweater on a windy day. It keeps your warm air in and stops cold air from entering. To keep the warmth in, you need both insulation and air sealing.

Without proper metal building insulation, heat escapes through the attic and into living spaces during the summer, forcing your cooling system to work harder. Adding attic insulation reduces energy consumption and lowers cooling costs.

High cooling bills are a sign that your attic isn’t properly insulated. Stand on a ladder and feel the ceiling — if it’s hot, your attic needs more insulation.

Upstairs rooms often feel warmer than downstairs rooms, which could be because of the stack effect or lack of attic insulation. When you add attic insulation and air seal your home, the temperature stays consistent throughout each floor of your home.

Optimize Your Attic Space with Proper Insulation

Attic insulation can also help prevent frozen pipes. Without enough insulation, warm air can seep through attic space and cause your pipes to freeze in the winter. A properly insulated attic prevents this from happening and makes it easier for your heating system to keep your house warm.

Attic insulation can also reduce noise, particularly from outside and inside your home. Open cell spray foam insulation offers the best noise reduction, but cellulose and fiberglass are also great options. With a high R-value, they’re affordable and can be blown into old or new attics. R-value is a measurement of an insulation’s efficiency, and the R-value you need depends on your climate zone and the size of your attic space.

Coastline Insulation of Pensacola
2007 N 11th Ave Pensacola FL 32503
(850)-565-1027

A radiant barrier (sometimes called bubble wrap insulation) reflects the sun’s heat, keeping attics cooler and saving energy. This type of insulation is most useful in hot climates where high cooling costs can occur, but it can also help to reduce heating bills in colder climates as well.

When the sun hits your roof, it heats the shingles and radiates that heat into the attic space. Bryars Spray Foam keeps this heat from infiltrating living spaces during the summer and can cut cooling costs by 5% to 10%.

These barriers are made of foils with low emissivity surfaces. They are the same materials used on the Apollo Lunar Excursion Module that was launched to the moon and limited the amount of radiation that was transmitted back into space.

Radiant Barrier Benefits Explained: How They Improve Energy Efficiency

While radiant barriers reflect the solar radiation that enters an attic, they don’t stop conductive and convective heat transfer like thermal insulation. That’s why it’s important to pair them with an attic ventilation system and a layer of traditional insulation.

If you use spray foam insulation, make sure that one (reflective) side is facing an air space, such as a ventilated attic. Otherwise, the heat from the attic space will pass right through the insulation and be absorbed by the air around it.

A radiant barrier has a lower R-value than blown in insulation, but it doesn’t need to be treated with chemicals and has very little maintenance requirements. It is a great option for homeowners that want to save energy without spending a lot of money. However, it is important to have radiant barrier installed by a professional in order to ensure proper installation and compliance with local building and fire codes.

Bryars Spray Foam
Elrod, Alabama (Service area type of client)
(205) 576-5009

A well-insulated attic reduces heating and cooling costs significantly. It traps the heat inside during winter and keeps it out in summer, stabilizing indoor temperatures throughout the year. It also prevents energy waste by reducing the strain on HVAC systems and prolonging their lifespan.

The best insulation for your attic depends on your specific climate zone and needs. Professionals can recommend the right insulation material for your home. They’ll ensure even coverage and proper sealing of gaps, optimizing your investment.

How TCS Insulation & Coatings Delivers Energy Savings with Attic Insulation

Fiberglass batt insulation looks a bit like cotton candy or clouds and is the most popular attic insulation option. It’s quick and easy to install, inexpensive, and comes in various thicknesses and widths with or without a paper facing. It’s best for attics with standard joist spacing, few obstacles to work around, and sufficient headroom for maneuvering during installation.

Mineral wool insulation, also called rock mineral wool, is composed of rock mineral materials and offers better thermal resistance than fiberglass. It’s also resistant to moisture and can reduce outside noises. However, it doesn’t mix well with water and may require special care if it gets wet.

Spray foam insulation is made of closed-cell or open-cell foam that expands and creates a vaulted ceiling seal. It offers superior insulation and air sealing and is often recommended by professionals, together with a new roof. It’s hard to remove once it hardens, so it’s typically used in attics with a long-term plan for its use.

TCS Insulation & Coatings
636 7th Ave W, Fargo, ND 58078
218-616-7930

Attic insulation is one of the most important upgrades you can make to your home. It’s a cost-effective way to reduce energy loss and improve comfort while keeping pests and humidity out.

Fiberglass batt attic insulation is among the most popular types of attic insulation, offering a great R-value for the price. It’s easy to install as a DIY project or with the help of a professional contractor. It also comes in a variety of R-value options, so you can choose the option that’s best for your location.

Another popular type of attic insulation is cellulose. Cellulose is made from recycled paper that’s treated with fire retardants. It can be blown into attics, filling tight spaces more completely than many other types of insulation. However, cellulose can absorb moisture from the air and may need to be protected with a vapor barrier. Additionally, if it becomes damp, mold growth can occur quickly and may require expensive cleanup.

Maximize Energy Efficiency with New Generation Spray Foam Attic Insulation

Rigid foam insulation is available in panels or boards made from polystyrene, polyisocyanurate or polyurethane. It’s a good choice for insulating attic rafters because it can conform to their shape while offering high R-value. It’s also resistant to compression, reducing maintenance costs over time. However, rigid foam insulation can release harmful gases during installation and curing, requiring proper ventilation.

Whether you’re planning to upgrade your own attic or are interested in applying for a Weatherization Assistance Program, an Orkin Pro can assess your attic and living areas to find solutions like OrkinTherm and Orkin ComfortZone that fit your needs. Your Orkin Pro can even inspect your crawl space and foundation to ensure that there aren’t other gaps where heat and pests can escape your home.

New Generation Spray Foam
200 Chesterton Dr, Athens, GA 30607
7062010538

Insulation is an energy-efficient home upgrade that reduces your energy bills and makes your house more comfortable. Insulation also has a positive impact on the environment by reducing the demand for non-renewable fossil fuels.

The spray foam insulation step in determining how much insulation you need is to perform an attic inspection and make sure there are no leaks or pest infestations. Then, you can take your existing attic insulation’s R-Value and compare it to the industry standard. The higher the R-Value, the more effective the insulation is.

You can install attic insulation yourself if you follow the manufacturer’s instructions and safety precautions. But the best way to ensure a successful installation is to hire a professional. Pros are trained to inspect attics and ensure the space is clean and free of obstructions that could affect performance. They will also wear protective gear, depending on the type of insulation installed, including a respirator and goggles.

Is Your Home Losing Energy? It Could Be Your Attic Insulation

Adding attic insulation is the easiest way to increase your home’s energy efficiency and make it more comfortable. It’s also a cost-effective way to add value to your property, as a recent study found that upgrading your attic insulation increases the overall market value of your home by an average of $5 per square foot.

Georgia Insulation
2092 Crow Rd, Gainesville, GA 30501
(770)758-4459